MARVEL Series Laser Cutting Machine
SMART Series Laser Cutting Machine
HG-SSP 135/3200 CNC Bending Machine
This HGSTAR HG-SSP 135T/3200 CNC bending machine adopts five-axis linkage configuration, fitted with top-tier imported control, hydraulic, grating and power components, equipped with deflection compensation table and high-precision back gauge
FARLEY LASERLAB AUTO: CNC Bending Machine
HG-SSP 135/3200 CNC Bending Machine
Model: HG-SSP 135T/3200
Category:CNC bending machine
Brand Name: HGSTAR
Laser power: 13.2KW
CNC Bending Machine HG-SSP 135/3200
This HGSTAR HG-SSP 135T/3200 CNC bending machine adopts five-axis linkage configuration, fitted with top-tier imported control, hydraulic, grating and power components, equipped with deflection compensation table and high-precision back gauge, with 13.2KW laser power and standard molds.
Features:
High-precision synchronous control ensures accurate bending and positioning.
Servo-driven X-axis and R-axis rear stoppers for precise position control.
V-axis compensation eliminates slider deformation for consistent workpiece quality.
Closed-loop non-overflow system saves energy, runs cool and efficient.
HG-SSP 135/3200 CNC Bending Machine – Technical Specifications
| No. | Project | Qty | Remark |
|---|---|---|---|
| 1 | Control System | 1 Set | Netherlands DELEM DA53T System |
| 2 | Servo Motor And Drive | 1 Set | Nanjing Eston |
| 3 | Hydraulic Pump | 1 Set | SUNNY, USA |
| 4 | Hydraulic Valve | 1 Set | BOSCH- REXROTH |
| 5 | Ball Screw | 1 Set | Taiwan |
| 6 | Linear Guide Rail | 1 Set | Taiwan |
| 7 | Connector | 1 Set | German |
| 8 | Seal Ring | 1 Set | Japan Nok Or Germany |
| 9 | Grating Ruler | 1 Set | Spain FAGOR |
| 10 | Main Electrical Components | 1 Set | Schneider |
| 11 | Cylinder | 1 Set | Jining Taifeng |
| 12 | Servo Main Motor | 1 Set | Nanjing Eston |
| No | Configuration | Numerical value | unit | Remark | |
|---|---|---|---|---|---|
| 1 | Nominal pressure | 1350 | KN | ||
| 2 | Foldable plate width | 3200 | mm | ||
| 3 | Slide stroke | 200 | mm | ||
| 4 | Maximum opening height | 420 | mm | ||
| 5 | Column spacing | 2700 | mm | ||
| 6 | throat depth | 400 | mm | ||
| 7 | Fast down speed | 160 | mm/ s | ||
| 8 | Return speed | 130 | mm/ s | ||
| 9 | Working speed | 10 | mm/ s | ||
| 10 | Main motor power | 11 | Kw | servo motor | |
| 11 | CNC system | DA53T | Netherlands | ||
| 12 | X-axis travel of rear stopper | 500 | mm | ||
| 13 | Number of control axes | 4+ 1 Axis (Y1 、Y2 、X 、R+V) | |||
| 14 | Machine tool accuracy | Slider repeat accuracy | ≤±0.01 | mm | |
| 15 | Slide positioning accuracy | ≤±0.02 | mm | ||
| 16 | Workpiece straightness | 0.3 / m | mm | ||
| 17 | Bending angle error | <±30 | ′ | ||
| 18 | Raster scale resolution | 0.005 | mm | ||
| 19 | Rear retaining material | X-axis travel | 500 | mm | |
| 20 | X-axis speed | 200 | mm/s | ||
| 21 | positioning accuracy | ±0.05 | mm | ||
| 22 | Repetitive positioning accuracy | ±0.015 | mm | ||
| 23 | Machine wight | 10 T | T | ||
| 24 | Machine diamentions | L 3500 / W 1580 /H 2500 | mm | ||
Machine configuration:
- Y1-Y2-X-R-V five-axis CNC
- Equipped with the special CNC system for DA53T bending machine from DELEM, the Netherlands
- Equipped with German BOSCH-REXROTH high-performance proportional servo hydraulic system
- Configure the grating ruler of SPAIN FAGORcompany
- Configure the oil pump of SUNNY, USAcompany
- The mechanical downward inclined block deflection compensation worktable controlled by the DNC system
- The back gauge is equipped with high-performance servo motor and ball screw
- A set of standard molds
The main oil cylinders on both sides are synchronously controlled by the electro-hydraulic servo valve imported from Germany and the grating ruler of FAGOR in Spain,The feedback is accurate, and the slider operates accurately, so that the bending accuracy and the repeated positioning accuracy of the slider are high.
V-axis compensation. Solve the influence of the deformation of the slider during the bending process on the quality of the workpiece. The compensation amount is automatically controlled by the numerical control system.
The X-axis rear retaining frame is composed of left and right guide rail seats, beams, adjusting seats, supports, adjustable supports, seat plates, adjusting seats, adjusting screws, retaining fingers and other parts. The control of X-axis movement is realized through the servo motor of X-axis.
The rear stopper of R-axis is composed of guide rail seat, R-axis motor and reducer, and drives the cross beam along the linear guide moves up and down. The control of the R-axis movement is realized by the servo motor of the R-axis.
Size and pressure change, feedback the monitoring signal to the driver for rapid processing and correction, which is a closed-loop non-overflow first
Enter the control method. The advantages are energy saving, low oil temperature, environmental protection and high efficiency.
Related products
Its primary purpose is to bend workpieces into specific shapes or angles, using linear or rotational movements to achieve bending. The advantages of a bending machine are durability, increased speed, cost-effectiveness with various steel plates, pipes, and rebars. Additionally, this CNC bending machine can perform multiple actions.